Dremel 546-01 1-1/4-Inch Diameter Rip/Crosscut Blade
- Designed to be used only in conjunction with the 670 Dremel Mini Saw attachment
- Cuts both with and across the grain on wood and wood-like materials
- Made of steel
- Contains 48 cutting teeth
- Measures 1-1/4 inches in diameter
Product Description
Mini rip crosscut saw blade used for Dremel model No. 670 mini saw blade. Maximum operating speed of 35,000 RPM. 1 1 4″ diameter. 48T. 1 blade per card.Amazon.com Product Description
The Dremel 1-1/4-Inch Rip/Crosscut Blade is a long-lasting, mini circular blade that cuts both with and across the grain on wood and wood-like materials. The steel blade has a 1-1/4-inch diameter and is designed to be used only in conjunction with the 670 Dremel Mini Saw attachment. The blade mounts directly to the attachment so no mandrel is needed. This blade has 48 cutting teeth.
Dremel 546-01 1-1/4-Inch Diameter Rip/Crosscut Blade
King Arthur’s Tools 45814 Lancelot 4-Inch Diameter 14 Tooth Fine Cut Chain Carver Attachment for Side Grinder with 5/8-Inch Arbor
- Arbor turns your grinder into a carving tool
- Cuts in any direction while making smooth cuts
- Especially useful for cutting floor and wall openings
- Round file included for sharpening arbor teeth
- Fits most 4- and 4-1/2-inch angle grinders
Product Description
Lancelot Woodcarving Discs take the muscle work out of woodcarving with their speed, power and maneuverability. The secret is in the special chain saw blade which is securely held between two stainless steel plates. Mount the 4″ dia. Lancelot in your 4″ or 4-1/2″ angle grinder and watch the chips fly! It easily cuts the hardest woods regardless of grain or knots. The 14-tooth model is great for “roughing out” the 22-tooth model and leaves a smoother “finished” surface. Teeth can be re-sharpened using a standard chain saw file. Maximum 14,000 RPM. Chains cannot be interchanged between models. Squire Mini Woodcarving Discs can be attached to another disc for the ultimate in power carving! It can be used alone as a small carving disc by attaching the 3-3/8″ dia. Squire to a Lancelot Disc with the Universal Mounting Nut. You can effectively double your cutting capacity. You not only remove waste material faster but curved work, like the inside of bowls, is easier and smoother than when using a single disc. Fits all mini grinders with 5/8″ x 11 TPI arbors.Amazon.com Product Description
The King Arthurs Tools Lancelot 5/8-Inch 14-Tooth Arbor turns your grinder into a carving tool with the versatility to cut in any direction while making smooth cuts. It’s especially useful for cutting openings in floors and walls, or for notching and grooving projects. You can also use it for freehand shaping of sculpture or carving projects, as well as large wood removal projects. Sharpen the 14 teeth with the included 5/32-inch round file. This arbor fits most 4 and 4 1/2-inch angle grinders.
King Arthur’s Tools 45814 Lancelot 4-Inch Diameter 14 Tooth Fine Cut Chain Carver Attachment for Side Grinder with 5/8-Inch Arbor
Vaughan SF6 6-Ounce Soft-Face Hammer, 1 3/8-Inch Face Diameter, 10 1/2-Inch Long.
- Beautifully balanced light two faced hammer- 10 1/2″ long
- Comes with two replaceable soft faces, one soft (red), one hard (yellow), 1 3/8″ face diameter
- Flame-treated hickory handle
- Handle is triple wedged in tapered eye, and epoxy sealed for “Sure-Lock” handle tightness
- Computer designed for superior balance to reduce fatigue
Product Description
Dead Blow Non Marring – Hammers & Mallets Tool Type: Split Head Hammer Tool Style: Soft Face Split Head Hammer Head Weight (oz.): 6 Head Weight: 3/8 Head Material: Carbon Steel Handle Material: Hickory
Vaughan SF6 6-Ounce Soft-Face Hammer, 1 3/8-Inch Face Diameter, 10 1/2-Inch Long.
I am replacing a few hose clamps under the hood of my car.
The clamps I see that are for sale have an “Effective Diameter Range”.
How do I determine what that is ?
The hose before it is clamped ?
After the clamp is tightened ?
I notice that the Effective Diameter Ranges overlap a good bit – more than one part/model could produce the same clamped diameter.
This is the only thing that I need to know before getting to work on this.
Thanks.
OK.
Like I said – what am I measuring ?
Am I measuring the hose where it is not clamped or where it is clamped ?
